Halton

[ancientarmourer]

Post 22. Peter. The 81st final test job was a 100 series tail unit cocking tool for cocking the timer. Apparently this was the 1st time an assembly job was given instead of the usual fitting job. The time limit for completion of the job had to be extended as we were given high carbon steel that stripped the teeth from a hacksaw blade and a 10" bastard would hardly scratch the surface. Still had to work to thou's of an inch.

[PETERTHEEATER]

Ahh...I seem to remember that one but not sure we made it. At this stage of life I cannot remember what our final test job was.